Typical Toilet Stall Door Size

Generally stall doors open inward but for ada accessible stalls the doors should open outward to make it easier for those with accessibility devices to enter and exit.

Typical toilet stall door size.

Standard toilet stalls are 36 wide by 60 depth. If toilet stall approach is from the latch side of the stall door clearance between the door side of the stall and any obstruction may be reduced to a minimum of 42 in 1065 mm. However stall depth can be anywhere between 48 inches to 78 inches as needed. Water closet compartments shall be not less than 30 inches 762 mm in width and not less than 60 inches 1524 mm in depth for floor mounted water closets and not less than 30 inches 762 mm in width.

These bathroom stalls have 82 inch 208 cm pilasters with a door and divider height of 58 inches 147 cm. The doors and dividers are mounted 12 inches 30 cm off the floor. The size for a separate toilet compartment should be at least 36x66 inches with a swing out or pocket door. Key facts for understanding your bathroom partition dimensions.

The layout should include where your tiled walls are as well as how wide and deep the compartments you want them to be. The overall width should equal the sum of adding up each stall width. The location of the door is in front of the clear space and diagonal to the water closet with a maximum stile width of 4 inches 100 mm. Horizontal grab bars must be mounted on each side wall or partition as well as a toilet paper dispenser that s easily.

Standard toilet stall dimensions. Figure 30 a standard stall. The minimum width of the stall is 60 inches 1525 mm. While the numbers may vary in accordance with the unique characteristics of your bathroom space a standard toilet stall is 36 inches wide and 60 inches deep.

The factory will determine pilaster sizes from the stall width and door width sizes that we give them see chart click on picture and then expand. The minimum width of the stall is 60 inches 1525 mm. The centerline of the water closet is 18 inches 455 mm from the side wall. Typically bathroom stalls are floor mounted with an overhead bracing.

The minimum depth for a partition stall is 48 inches but the depth can be as much as 78 inches if necessary. These are required whenever there are six or more toilets in one room. The minimum size for a separate toilet compartment is 30x60 inches. Standard walk in compartments meanwhile feature a toilet centered on the back wall and an out swinging door.

Standard bathroom stall sizes rarely vary and tend to be 36 inches wide and 60 inches deep.